// CODE SNIPPET
312.6 Gravity Sewer Test
JUMP TO FULL CODE CHAPTER
Gravity sewer tests shall consist of plugging the end of the building sewer at the point of connection with the public sewer, filling the building sewer with water, testing with not less than a 10-foot (3048 mm) head of water and maintaining such pressure for 15 minutes.
Related Code Sections
312.6 General Regulations, Gravity Sewer Test
Gravity sewer tests shall consist of plugging the end of the building sewer at the point of connection with the public sewer, filling ...
Plumbing Code 2018 of Kansas > 3 General Regulations > 312 Tests and Inspections > 312.6 Gravity Sewer Test
P2503.4 Plumbing Administration, Building Sewer Testing
The building sewer shall be tested by insertion of a test plug at the point of connection with the public sewer, filling the building sewer ...
Residential Code 2018 of Kansas > 25 Plumbing Administration > P2503 Inspection and Tests > P2503.4 Building Sewer Testing
Section P3010 Sanitary Drainage, Replacement of Underground Building Sewers and Building Drains by Pipe Bursting Methods
This section shall govern the replacement of existing building sewer and building drain piping by pipe-bursting methods ...
Residential Code 2018 of Kansas > 30 Sanitary Drainage > P3010 Replacement of Underground Building Sewers and Building Drains by Pipe Bursting Methods
712.1 Sanitary Drainage, Building Subdrains
Building subdrains that cannot be discharged to the sewer by gravity flow shall be discharged into a tightly covered and vented sump from which ...
Plumbing Code 2018 of Kansas > 7 Sanitary Drainage > 712 Sumps and Ejectors > 712.1 Building Subdrains
P3007.1 Sanitary Drainage, Building Subdrains
Building subdrains that cannot be discharged to the sewer by gravity flow shall be discharged into a tightly covered and vented sump from which ...
Residential Code 2018 of Kansas > 30 Sanitary Drainage > P3007 Sumps and Ejectors > P3007.1 Building Subdrains