// CODE SNIPPET
1910.262(k) Gill Boxes
JUMP TO FULL CODE CHAPTER
A guard shall be placed ahead of the feed end and shall be so designed that it will prevent the worker's fingers from being caught in the pins of the intersecting fallers.
Related Code Sections
1910.262(b)(14) Special Industries, Gill Box
A gill box is a machine used in the worsted system of manufacturing yarns. Its function is to arrange the fibers in parallel order. Essentially ...
OSHA 1910 General Industry > R Special Industries > 1910.262 Textiles > 1910.262(b) Definitions Applicable to This Section > 1910.262(b)(14) Gill Box
1910.262 Special Industries, Textiles
classification, including combers, sliver lap machines, ribbon lap machines, and gill boxes, but excluding cards ...
1910.263(i)(1) Special Industries, Proof Boxes
All door locks shall be operable both from within and outside the box. Guide rails shall be installed to center the rack as it enters, passes through ...
OSHA 1910 General Industry > R Special Industries > 1910.263 Bakery Equipment > 1910.263(i) Miscellaneous Equipment > 1910.263(i)(1) Proof Boxes
1910.262(p)(1) Special Industries, J-Box Protection
Each valve controlling the flow of steam, injurious gases, or liquids into a J-box shall be equipped with a chain, lock, and key, so that any worker ...
OSHA 1910 General Industry > R Special Industries > 1910.262 Textiles > 1910.262(p) Continuous Bleach Range (Cotton and Rayon) > 1910.262(p)(1) J-Box Protection
1910.305(b) Electrical, Cabinets, Boxes, and Fittings
Conductors entering cutout boxes, cabinets, or fittings shall be protected from abrasion, and openings through which conductors enter shall ...
OSHA 1910 General Industry > S Electrical > 1910.305 Wiring Methods, Components, and Equipment for General Use > 1910.305(b) Cabinets, Boxes, and Fittings