// CODE SNIPPET
22.5.2 Geometric Assumptions
JUMP TO FULL CODE CHAPTER
For calculation of Vc and Vs in prestressed members, d shall be taken as the distance from the extreme compression fiber to the centroid of prestressed and any nonprestressed longitudinal reinforcement but need not be taken less than 0.8h.
For calculation of Vc and Vs in solid, circular sections, d shall be permitted to be taken as 0.8 times the diameter, and bw shall be permitted to be taken as the diameter.
Related Code Sections
22.5.2 Sectional Strength, Geometric Assumptions
For calculation of V c and V s in prestressed members, d shall be taken as the distance from the extreme compression fiber ...
Building Code Requirements for Structural Concrete of New York State > 22 Sectional Strength > 22.5 One-Way Shear Strength > 22.5.2 Geometric Assumptions
29.4 Single- And Multiple-Station Alarms and Household Fire Alarm Systems, Assumptions
The requirements of this chapter shall assume that occupants are not intimate with the ignition and are capable of self-rescue ...
National Fire Alarm and Signaling Code 2016 of New York State > 29 Single- And Multiple-Station Alarms and Household Fire Alarm Systems > 29.4 Assumptions
6.3 Structural Analysis, Modeling Assumptions
Relative stiffnesses of members within structural systems shall be based on reasonable and consistent assumptions ...
Building Code Requirements for Structural Concrete of New York State > 6 Structural Analysis > 6.3 Modeling Assumptions
1613.6.1 Structural Design, Assumption of Flexible Diaphragm
Add the following text at the end of Section 18.104.22.168 of ASCE 7: Diaphragms constructed of wood structural panels or untopped steel decking shall ...
2010 Building Code of NY > 16 Structural Design > 1613 Earthquake Loads > 1613.6 Alternatives to ASCE 7 > 1613.6.1 Assumption of Flexible Diaphragm
22.2.2 Sectional Strength, Design Assumptions for Concrete
Maximum strain at the extreme concrete compression fiber shall be assumed equal to 0.003 ...
Building Code Requirements for Structural Concrete of New York State > 22 Sectional Strength > 22.2 Design Assumptions for Moment and Axial Strength > 22.2.2 Design Assumptions for Concrete