// CODE SNIPPET
Appendix 1926.703 General Requirements for Formwork
JUMP TO FULL CODE CHAPTER
(This Appendix is non-mandatory.)
This appendix serves as a non-mandatory guideline to assist employers in complying with the formwork requirements in 1926.703(a)(1). Formwork which has been designed, fabricated, erected, braced, supported and maintained in accordance with Sections 6 and 7 of the American National Standard for Construction and Demolition Operations Concrete and Masonry Work, ANSI A10.9-1983, shall be deemed to be in compliance with the provision of 1926.703(a)( 1).
[61 FR 5507, Feb. 13, 1996]
This appendix serves as a non-mandatory guideline to assist employers in complying with the formwork requirements in 1926.703(a)(1). Formwork which has been designed, fabricated, erected, braced, supported and maintained in accordance with Sections 6 and 7 of the American National Standard for Construction and Demolition Operations Concrete and Masonry Work, ANSI A10.9-1983, shall be deemed to be in compliance with the provision of 1926.703(a)( 1).
[61 FR 5507, Feb. 13, 1996]
Related Code Sections
1926.703(a) Concrete and Masonry Construction, General Requirements for Formwork
Formwork shall be designed, fabricated, erected, supported, braced and maintained so that it will be capable of supporting without failure all ...
OSHA 1926 Construction > Q Concrete and Masonry Construction > 1926.703 Requirements for Cast-In-Place Concrete > 1926.703(a) General Requirements for Formwork
1926.703 Concrete and Masonry Construction, Requirements for Cast-In-Place Concrete
), the employer shall comply with the following specific requirements in addition to the general requirements for formwork ...
OSHA 1926 Construction > Q Concrete and Masonry Construction > 1926.703 Requirements for Cast-In-Place Concrete
1926.700(b)(2) Concrete and Masonry Construction, Formwork
Formwork means the total system of support for freshly placed or partially cured concrete, including the mold or sheeting (form) that is in contact ...
OSHA 1926 Construction > Q Concrete and Masonry Construction > 1926.700 Scope, Application, and Definitions Applicable to This Subpart > 1926.700(b) Definitions Applicable to This Subpart > 1926.700(b)(2) Formwork
1926.703(e) Concrete and Masonry Construction, Removal of Formwork
Forms and shores (except those used for slabs on grade and slip forms) shall not be removed until the employer determines that the concrete has gained ...
OSHA 1926 Construction > Q Concrete and Masonry Construction > 1926.703 Requirements for Cast-In-Place Concrete > 1926.703(e) Removal of Formwork
1926.501(b)(5) Fall Protection, Formwork and Reinforcing Steel
Each employee on the face of formwork or reinforcing steel shall be protected from falling 6 feet (1.8 m) or more to lower levels by personal fall ...
OSHA 1926 Construction > M Fall Protection > 1926.501 Duty to Have Fall Protection > 1926.501(b) > 1926.501(b)(5) Formwork and Reinforcing Steel