// CODE SNIPPET
1910.265(a) General Requirements—Application
JUMP TO FULL CODE CHAPTER
This section includes safety requirements for sawmill operations including, but not limited to, log and lumber handling, sawing, trimming, and planing; waste disposal; operation of dry kilns; finishing; shipping; storage; yard and yard equipment; and for power tools and affiliated equipment used in connection with such operations, but excluding the manufacture of plywood, cooperage, and veneer.
Related Code Sections
1910.265(a) Special Industries, General Requirements—Application
This section includes safety requirements for sawmill operations including, but not limited to, log and lumber handling, sawing, trimming ...
OSHA 1910 General Industry > R Special Industries > 1910.265 Sawmills > 1910.265(a) General Requirements—Application
1910.252(d)(1) Welding, Cutting, and Brazing, Transmission Pipeline
The requirements of paragraphs (b) and (c) of this section and 1910.254 of this part shall be observed ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.252 General Requirements > 1910.252(d) Industrial Applications > 1910.252(d)(1) Transmission Pipeline
1910.252(d)(1)(iv) Welding, Cutting, and Brazing, Pressure Testing
In pressure testing of pipelines, the workers and the public shall be protected against injury by the blowing out of closures or other pressure ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.252 General Requirements > 1910.252(d) Industrial Applications > 1910.252(d)(1) Transmission Pipeline > 1910.252(d)(1)(iv) Pressure Testing
1910.252(d)(1)(v) Welding, Cutting, and Brazing, Construction Standards
The welded construction of transmission pipelines shall be conducted in accordance with the Standard for Welding Pipe Lines and Related Facilities ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.252 General Requirements > 1910.252(d) Industrial Applications > 1910.252(d)(1) Transmission Pipeline > 1910.252(d)(1)(v) Construction Standards
1910.252(d)(1)(vi) Welding, Cutting, and Brazing, Flammable Substance Lines
The connection, by welding, of branches to pipelines carrying flammable substances shall be performed in accordance with Welding or Hot Tapping ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.252 General Requirements > 1910.252(d) Industrial Applications > 1910.252(d)(1) Transmission Pipeline > 1910.252(d)(1)(vi) Flammable Substance Lines