// CODE SNIPPET
Section 301 General [B]
JUMP TO FULL CODE CHAPTER
The provisions of this chapter shall apply to the alteration, repair, addition and change of occupancy of existing structures, including moved structures, as referenced in Section 101.5.1.
Exception: Existing bleachers, grandstands and folding and telescopic seating shall comply with ICC 300-02.
Exception: Existing bleachers, grandstands and folding and telescopic seating shall comply with ICC 300-02.
Alterations, repairs, additions and changes of occupancy to existing structures shall comply with the provisions of this chapter or with one of the methods provided in Section 101.5.
Related Code Sections
Section 301 Prescriptive Compliance Method, General [B]
The provisions of this chapter shall apply to the alteration, repair, addition and change of occupancy of existing structures, including moved ...
607.1.1 Duct Systems, Ducts Without Dampers
of Section 712 of the Building Code of New York State . [B] ...
2010 Mechanical Code of NY > 6 Duct Systems > 607 Duct and Transfer Openings [B] > 607.1 General > 607.1.1 Ducts Without Dampers
309.1 General Regulations, Space-Heating Systems
not be used to achieve compliance with this section. [B] Exception: Interior spaces where the primary purpose is not associated with human comfort ...
2010 Mechanical Code of NY > 3 General Regulations > 309 Temperature Control [B] > 309.1 Space-Heating Systems
(5) Special Occupancies, Fuses
Where general-purpose enclosures are permitted in 501.105(B)(2) through (B)(4), fuses for overcurrent protection of instrument circuits not subject ...
National Electrical Code 2017 of New York State > 5 Special Occupancies > 501 Class I Locations > 501.105 Meters, Instruments, and Relays > (B) Class I, Division 2 > (5) Fuses
(C) Equipment for General Use, General-Use Switches
Knife switches of ratings less than specified in 404.13(A) and (B) shall be considered general-use switches. Informational Note: See the definition ...
National Electrical Code 2017 of New York State > 4 Equipment for General Use > 404 Switches > 404.13 Knife Switches > (C) General-Use Switches