// CODE SNIPPET
1910.430(g) Gauges and Timekeeping Devices
JUMP TO FULL CODE CHAPTER
Gauges indicating diver depth which can be read at the dive location shall be used for all dives except SCUBA.
Each depth gauge shall be deadweight tested or calibrated against a master reference gauge every 6 months, and when there is a discrepancy greater than two percent (2 percent) of full scale between any two equivalent gauges.
A timekeeping device shall be available at each dive location.
Related Code Sections
1910.430(g) Commercial Diving Operations, Gauges and Timekeeping Devices
A timekeeping device shall be available at each dive location ...
OSHA 1910 General Industry > T Commercial Diving Operations > 1910.430 Equipment > 1910.430(g) Gauges and Timekeeping Devices
1910.169(b)(3) Compressed Gas and Compressed Air Equipment, Gauges and Valves
Every air receiver shall be equipped with an indicating pressure gauge (so located as to be readily visible) and with one or more spring-loaded ...
OSHA 1910 General Industry > M Compressed Gas and Compressed Air Equipment > 1910.169 Air Receivers > 1910.169(b) Installation and Equipment Requirements > 1910.169(b)(3) Gauges and Valves
1910.1051(g)(5)(iv) Toxic and Hazardous Substances,
Gauging devices designed to limit employee exposure, such as magnetic gauges on rail cars ...
OSHA 1910 General Industry > Z Toxic and Hazardous Substances > 1910.1051 1,3-Butadiene > 1910.1051(g) Exposure Goal Program > 1910.1051(g)(5) > 1910.1051(g)(5)(iv)
1910.1051(g)(5) Toxic and Hazardous Substances,
-sealed or seal-less pumps. Gauging devices designed ...
OSHA 1910 General Industry > Z Toxic and Hazardous Substances > 1910.1051 1,3-Butadiene > 1910.1051(g) Exposure Goal Program > 1910.1051(g)(5)
1910.169(b)(3)(iii) Compressed Gas and Compressed Air Equipment,
Safety appliances, such as safety valves, indicating devices and controlling devices, shall be constructed, located, and installed so ...
OSHA 1910 General Industry > M Compressed Gas and Compressed Air Equipment > 1910.169 Air Receivers > 1910.169(b) Installation and Equipment Requirements > 1910.169(b)(3) Gauges and Valves > 1910.169(b)(3)(iii)