// CODE SNIPPET
Article 16 Gas Fired Equipment
JUMP TO FULL CODE CHAPTER
The construction and installation of gas burning equipment shall comply with the applicable requirements of article five of this subchapter and reference standards RS 14-2 and RS 14-6. The installation of gas piping shall be in accordance with the provisions of subchapter sixteen of this chapter, and for the installation of chimneys and gas vents, the provisions of subchapter fifteen of this chapter.
Only accepted natural gas-fired barbecues or grilles that employ an open flame for roasting or broiling and that are located in the interior of buildings, or on the exterior of buildings when against any part of an exterior wall, shall be installed. All provisions for the construction and installation of fireplaces set forth in article 19 of this subchapter shall be complied with in the construction and installation of barbecue grilles.
Related Code Sections
Article 16 Heating and Combustion Equipment, Gas Fired Equipment
The construction and installation of gas burning equipment shall comply with the applicable requirements of article five of this subchapter ...
§27-882 Chimneys and Gas Vents, Chimneys for Venting Gas-Fired Equipment
When venting of gas-fired equipment is provided for by the use of chimneys, such chimneys shall be constructed in accordance with the requirements ...
NYC 1968 Code (Vol I) > 15 Chimneys and Gas Vents > 5 Gas Vent Systems > §27-882 Chimneys for Venting Gas-Fired Equipment
§27-892 Chimneys and Gas Vents, Construction
Vent connectors for conversion burners without draft hoods, or other gas-fired equipment without draft hoods, shall be constructed of materials ...
§27-895 Chimneys and Gas Vents, Size of Connectors
The vent connector shall not be smaller than the size of the flue collar or the draft hood outlet of the gas-fired equipment. Where a single item ...
NYC 1968 Code (Vol I) > 15 Chimneys and Gas Vents > 6 Gas Vent Connectors > §27-895 Size of Connectors
§27-884 Chimneys and Gas Vents, Types of Gas Vents
-fired equipment. Type B gas vents may be used for single-story or multi-story installations when they conform to the requirements of section 27-855 ...