// CODE SNIPPET
2107.2 Furnace Nameplate
JUMP TO FULL CODE CHAPTER
The following data for Class A furnaces shall be furnished on the manufacturer's nameplate:
- The solvent used.
- The number of gallons (liters) used per batch or per hour of solvent entering the furnace.
- The required purge time.
- The oven operating temperature.
- The exhaust blower rating for the number of gallons (liters) of solvent per hour or batch at the maximum operating temperature, or with regard to low-oxygen furnaces, the maximum allowable oxygen concentration.
Related Code Sections
Article 13 Heating and Combustion Equipment, Floor Furnaces
Floor furnaces shall be located so as to be accessible and shall not be installed in the floor of any corridor or passageway, nor in any exit ...
306.1.1 General Regulations, Central Furnaces
Central furnaces within compartments or alcoves shall have a minimum working space clearance of 3 inches (76 mm) along the sides, back and top ...
NYC Mechanical Code 2008 > 3 General Regulations > 306 Access and Service Space > 306.1 Clearances for Maintenance and Replacement > 306.1.1 Central Furnaces
306.1.1 General Regulations, Central Furnaces
Central furnaces within compartments or alcoves shall have a minimum working space clearance of 3 inches (76 mm) along the sides, back and top ...
NYC Mechanical Code 2014 > 3 General Regulations > 306 Access and Service Space > 306.1 Access for Maintenance and Replacement > 306.1.1 Central Furnaces
603.11 Duct Systems, Furnace Connections
Ducts connecting to a furnace shall have a clearance to combustibles in accordance with the furnace manufacturer's installation instructions ...
NYC Mechanical Code 2008 > 6 Duct Systems > 603 Duct Construction and Installation > 603.11 Furnace Connections
603.11 Duct Systems, Furnace Connections
Ducts connecting to a furnace shall have a clearance to combustibles in accordance with the furnace manufacturer's installation instructions ...
NYC Mechanical Code 2014 > 6 Duct Systems > 603 Duct Construction and Installation > 603.11 Furnace Connections