// CODE SNIPPET
(D) Functional Performance Tests
JUMP TO FULL CODE CHAPTER
A functional performance test program shall be established, documented, and executed upon complete installation of the critical system in order to establish a baseline reference for future performance requirements.
Informational Note: See Informative Annex F for more information on developing and implementing a functional performance test program.
Related Code Sections
(D) Special Conditions, Functional Performance Tests
A functional performance test program shall be established, documented, and executed upon complete installation of the critical system in order ...
National Electrical Code 2020 of Minnesota > 7 Special Conditions > 708 Critical Operations Power Systems (COPS) > 708.8 Commissioning > (D) Functional Performance Tests
220.127.116.11.3 General Requirements, Valve Body Strength Test
is not expected that the valve will be able to perform its function during or after the valve body strength test ...
Safety Code for Elevators and Escalators 2016 of Minnesota > 8 General Requirements > 8.3 Engineering Tests, Type Tests, and Certification > 8.3.9 Engineering Tests for Hydraulic Overspeed Valves > 18.104.22.168 Test Procedure > 22.214.171.124.3 Valve Body Strength Test
27.3.6 Public Emergency Alarm Reporting Systems,
functions tested be less than those stipulated in Chapter 14 ...
National Fire Alarm and Signaling Code 2016 of Minnesota > 27 Public Emergency Alarm Reporting Systems > 27.3 Management and Maintenance > 27.3.6
126.96.36.199.2 General Requirements,
required (see 188.8.131.52), it shall be adjusted and checked by means that will verify its proper function and holding capacity. A test complying ...
Safety Code for Elevators and Escalators 2016 of Minnesota > 8 General Requirements > 8.6 Maintenance, Repair, Replacement, and Testing > 8.6.4 Maintenance and Testing of Electric Elevators > 184.108.40.206 Brakes > 220.127.116.11.2
901.6.2 Fire Protection and Life Safety Systems, Integrated Testing
systems shall be verified when required testing of the initiating system is conducted. In addition, integrated testing shall be performed in accordance ...
2020 Minnesota Building Code > 9 Fire Protection and Life Safety Systems > 901 General > 901.6 Supervisory Service > 901.6.2 Integrated Testing