611.3 Functional and Performance Testing

Functional and performance testing shall be performed in accordance with the requirements of Sections 611.3.1, 611.3.2 and 611.3.3.

Equipment functional and performance testing shall demonstrate that the installation and operation of components, systems, and system-to-system interfacing relationships is in accordance with approved plans and specifications so that operation, function, performance and maintenance serviceability for each of the commissioned systems is confirmed. Testing shall include all specified modes of control and sequence of operation, including under full-load, part-load and all of the following emergency conditions:

1. Each mode as described in the sequence of operation.
2. Redundant or automatic backup mode.
3. Performance of alarms.
4. Mode of operation upon a loss of power and restoration of power.

Control systems shall be tested to document that control devices, components, equipment, and systems are calibrated, adjusted and operated in accordance with the approved plans and specifications.

The sequence of operation shall be verified to document that the sequence operates in accordance with the approved plans and specifications. This verified sequence of operation shall be the final record of system operation, and shall be included on the control "record documents," and as part of the education and Systems Manual operation and maintenance document that is provided to the owner.