// CODE SNIPPET
1910.211(d)(5) Full Revolution Clutch
JUMP TO FULL CODE CHAPTER
Full revolution clutch means a type of clutch that, when tripped, cannot be disengaged until the crankshaft has completed a full revolution and the press slide a full stroke.
Related Code Sections
1910.211(d)(5) Machinery and Machine Guarding, Full Revolution Clutch
Full revolution clutch means a type of clutch that, when tripped, cannot be disengaged until the crankshaft has completed a full revolution ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.211 Definitions > 1910.211(d) > 1910.211(d)(5) Full Revolution Clutch
1910.217(c)(3)(iii)(a) Machinery and Machine Guarding,
The device may not be used on machines using full revolution clutches ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.217 Mechanical Power Presses > 1910.217(c) Safeguarding the Point of Operation > 1910.217(c)(3) Point of Operation Devices > 1910.217(c)(3)(iii) > 1910.217(c)(3)(iii)(a)
1910.211(d)(50) Machinery and Machine Guarding, Single Stroke Mechanism
Single stroke mechanism means an arrangement used on a full revolution clutch to limit the travel of the slide to one complete stroke at each ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.211 Definitions > 1910.211(d) > 1910.211(d)(50) Single Stroke Mechanism
1910.217(c)(3)(viii) Machinery and Machine Guarding,
the press takes for the die closure after it has been tripped (seconds). For full revolution clutch presses with only one engaging point Tm is equal ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.217 Mechanical Power Presses > 1910.217(c) Safeguarding the Point of Operation > 1910.217(c)(3) Point of Operation Devices > 1910.217(c)(3)(viii)
1910.217(b)(6) Machinery and Machine Guarding, Two-Hand Trip
Two-hand trip systems on full revolution clutch machines shall ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.217 Mechanical Power Presses > 1910.217(b) Mechanical Power Press Guarding and Construction, General > 1910.217(b)(6) Two-Hand Trip