UpCodes logo
Go To Full Code Chapter
Where friction mechanisms (such as brakes and clutches) are used to control the boom hoist or load line hoist, they must be:
Of a size and thermal capacity sufficient to control all rated loads with the minimum recommended reeving.
Adjustable to permit compensation for lining wear to maintain proper operation.

Related Code Sections

1926.152(i)(6) Fire Protection and Prevention, "Sources of Ignition"
Sources of ignition may include open flames, lightning, smoking, cutting and welding, hot surfaces, frictional heat, sparks (static, electrical ...
1926.307(g) Tools - Hand and Power, "Guarding Friction Drives"
The driving point of all friction drives when exposed to contact shall be guarded, all arm or spoke friction drives and all web friction drives ...
1926.1426(b) Cranes and Derricks in Construction, Preventing Boom Free Fall
Where the use of equipment with a boom that is designed to free fall (live boom) is prohibited, the boom hoist must have a secondary mechanism ...