// CODE SNIPPET

1905.6.2 Frequency of Testing

Building Code 2009 of Alabama > 19 Concrete > 1905 Concrete Quality, Mixing and Placing > 1905.6 Evaluation and Acceptance of Concrete > 1905.6.2 Frequency of Testing

Go To Full Code Chapter

The frequency of conducting strength tests of concrete and the minimum number of tests shall be as specified in ACI 318, Section 5.6.2.

Exception: When the total volume of a given class of concrete is less than 50 cubic yards (38 m³), strength tests are not required when evidence of satisfactory strength is submitted to and approved by the building official.

Upcodes Diagrams

Related Code Sections

1905.6.2 Concrete, Frequency of Testing

The frequency of conducting strength tests of concrete and the minimum number of tests shall be as specified in ACI 318, Section 5.6.2. Exception ...

Building Code 2009 of Alabama > 19 Concrete > 1905 Concrete Quality, Mixing and Placing > 1905.6 Evaluation and Acceptance of Concrete > 1905.6.2 Frequency of Testing

26.12.2 Construction Documents and Inspection, Frequency of Testing

or walls. On a given project, if total volume of concrete is such that frequency of testing would provide fewer than five strength tests ...

Building Code Requirements for Structural Concrete of Alabama > 26 Construction Documents and Inspection > 26.12 Evaluation and Acceptance of Hardened Concrete > 26.12.2 Frequency of Testing

26.12.2 Construction Documents and Inspection, Frequency of Testing

for slabs or walls. (b) On a given project, if total volume of concrete is such that frequency of testing would provide fewer than five strength ...

Building Code Requirements for Structural Concrete of Alabama > 26 Construction Documents and Inspection > 26.12 Concrete Evaluation and Acceptance > 26.12.2 Frequency of Testing

14.4.4* Inspection, Testing, and Maintenance, Testing Frequency

is performed at least weekly by a remotely monitored fire alarm control unit specifically listed for the application, the manual testing frequency ...

National Fire Alarm and Signaling Code 2013 of Alabama > 14 Inspection, Testing, and Maintenance > 14.4 Testing > 14.4.4* Testing Frequency

14.4.4* Inspection, Testing, and Maintenance, Testing Frequency

is performed at least weekly by a remotely monitored fire alarm control unit specifically listed for the application, the manual testing frequency ...

National Fire Alarm and Signaling Code 2019 of Alabama > 14 Inspection, Testing, and Maintenance > 14.4 Testing > 14.4.4* Testing Frequency