// CODE SNIPPET
2305.1.2.1 Framing Members
JUMP TO FULL CODE CHAPTER
Framing members shall be at least 2 inch (51 mm) nominal width. In general, adjoining panel edges shall bear and be attached to the framing members and butt along their centerlines. Nails shall be placed not less than 3/8 inch (9.5 mm) from the panel edge, not more than 12 inches (305 mm) apart along intermediate supports, and 6 inches (152 mm) along panel edge bearings, and shall be firmly driven into the framing members.
Related Code Sections
2305.1.2.1 Wood, Framing Members
Framing members shall be at least 2 inch (51 mm) nominal width. In general, adjoining panel edges shall bear and be attached to the framing members ...
2010 Building Code of NY > 23 Wood > 2305 General Design Requirements for Lateral-Force-Resisting Systems > 2305.1 General > 2305.1.2 Framing > 2305.1.2.1 Framing Members
(1) Wiring Methods and Materials, Framing Members
An enclosure shall be fastened to the framing members by mechanical means such as bolts, screws, or rivets, or by the use of clips or other securing ...
National Electrical Code 2017 of New York State > 3 Wiring Methods and Materials > 314 Outlet, Device, Pull, and Junction Boxes; Conduit Bodies; Fittings; And Handhole Enclosures > 314.23 Supports > (D) Suspended Ceilings > (1) Framing Members
1704.10.3.2 Structural Tests and Special Inspections, Structural Framing Members
The thickness of the sprayed fire-resistant material applied to structural members shall be determined in accordance with ASTM E 605. Thickness ...
2010 Building Code of NY > 17 Structural Tests and Special Inspections > 1704 Special Inspections > 1704.10 Sprayed Fire-Resistant Materials > 1704.10.3 Thickness > 1704.10.3.2 Structural Framing Members
320.17 Wiring Methods and Materials, Through or Parallel to Framing Members
Type AC cable shall be protected in accordance with 300.4(A), (C), and (D) where installed through or parallel to framing members ...
National Electrical Code 2017 of New York State > 3 Wiring Methods and Materials > 320 Armored Cable: Type AC > 320.17 Through or Parallel to Framing Members
330.17 Wiring Methods and Materials, Through or Parallel to Framing Members
Type MC cable shall be protected in accordance with 300.4(A), (C), and (D) where installed through or parallel to framing members ...
National Electrical Code 2017 of New York State > 3 Wiring Methods and Materials > 330 Metal-Clad Cable: Type MC > 330.17 Through or Parallel to Framing Members