// CODE SNIPPET
M1403.2 Foundations and Supports
Related Code Sections
1301.9.4 Nonpotable Water Systems, Foundation and Supports
the installation requires a foundation, the foundation shall be flat and shall be designed to support the weight of the storage tank when full ...
Plumbing Code 2015 of Pennsylvania > 13 Nonpotable Water Systems > 1301 General > 1301.9 Nonpotable Water Storage Tanks > 1301.9.4 Foundation and Supports
3203.1.3 Cryogenic Fluids, Foundations and Supports
Containers shall be provided with substantial concrete or masonry foundations, or structural steel supports on firm concrete or masonry foundations ...
Fire Code 2009 of Pennsylvania > 32 Cryogenic Fluids > 3203 General Requirements > 3203.1 Containers > 3203.1.3 Foundations and Supports
M1403.2 Heating and Cooling Equipment, Foundations and Supports
Supports and foundations for the outdoor unit of a heat pump shall be raised at least 3 inches (76 mm) above the ground to permit free drainage ...
Residential Code 2009 of Pennsylvania > 14 Heating and Cooling Equipment > M1403 Heat Pump Equipment > M1403.2 Foundations and Supports
P2910.9.4 Water Supply and Distribution, Foundation and Supports
a foundation, the foundation shall be flat and shall be designed to support the storage tank weight when full, consistent with the bearing capability ...
Residential Code 2015 of Pennsylvania > 29 Water Supply and Distribution > P2910 Nonpotable Water Systems > P2910.9 Nonpotable Water Storage Tanks > P2910.9.4 Foundation and Supports
2126.96.36.199.1 Masonry, Foundation Support
Walls and partitions constructed of adobe units shall be supported by foundations or footings that extend not less than 6 inches (152 mm) above ...
Building Code 2009 of Pennsylvania > 21 Masonry > 2109 Empirical Design of Masonry > 2109.3 Adobe Construction > 2109.3.4 Construction > 2188.8.131.52 Foundations > 2184.108.40.206.1 Foundation Support