// CODE SNIPPET
1807.1.6.1 Foundation Wall Thickness
JUMP TO FULL CODE CHAPTER
The thickness of prescriptively designed foundation walls shall be not less than the thickness of the wall supported, except that foundation walls of not less than 8-inch (203 mm) nominal width shall be permitted to support brick-veneered frame walls and 10-inch-wide (254 mm) cavity walls provided that the requirements of Section 1807.1.6.2 or 1807.1.6.3 are met.
Related Code Sections
1807.1.6.1 Soils and Foundations, Foundation Wall Thickness
The thickness of prescriptively designed foundation walls shall be not less than the thickness of the wall supported, except that foundation walls ...
Building Code 2018 of Illinois > 18 Soils and Foundations > 1807 Foundation Walls, Retaining Walls and Embedded Posts and Poles > 1807.1 Foundation Walls > 1807.1.6 Prescriptive Design of Concrete and Masonry Foundation Walls > 1807.1.6.1 Foundation Wall Thickness
2113.5 Masonry, Corbeling
Masonry chimneys shall not be corbeled more than half of the chimney's wall thickness from a wall or foundation, nor shall a chimney be corbeled from ...
1809.7 Soils and Foundations, Prescriptive Footings for Light-Frame Construction
, E or F. For thickness of foundation walls, see Section 1807.1.6. Footings shall be permitted to support a roof in addition to the stipulated ...
Building Code 2018 of Illinois > 18 Soils and Foundations > 1809 Shallow Foundations > 1809.7 Prescriptive Footings for Light-Frame Construction
14.3.1 Plain Concrete, Bearing Walls
Minimum bearing wall thickness shall be in accordance with Table 22.214.171.124. Table 126.96.36.199—Minimum thickness of bearing walls Wall type ...
Building Code Requirements for Structural Concrete of Illinois > 14 Plain Concrete > 14.3 Design Limits > 14.3.1 Bearing Walls
11.3.1 Walls, Minimum Wall Thickness
Minimum wall thicknesses shall be in accordance with Table 188.8.131.52. Thinner walls are permitted if adequate strength and stability can ...
Building Code Requirements for Structural Concrete of Illinois > 11 Walls > 11.3 Design Limits > 11.3.1 Minimum Wall Thickness