188.8.131.52.7 Force and Movement Test
The force and movement recorded in each test shall be, respectively
(a) the maximum force, measured in a horizontal plane, that must be applied to that member of the device that is directly actuated by the cam to release the door-locking member of the device from locking engagement
(b) the distance, projected on a horizontal plane, that the member of the device directly actuated by the cam travels from its position when the lock is fully engaged to its position when the locking member is released from engagement
The force and movement markings required by 184.108.40.206(f) shall be not less than the average of these recorded values.