(9/7/17)
R6 R7 R8 R9 R10
In the districts indicated, for #Quality Housing buildings#, the maximum #floor area ratio# and maximum #residential lot coverage# for #interior lots# or #through lots# shall be as set forth in the table in this Section. The maximum #residential lot coverage# for a #corner lot# shall be 100 percent.
MAXIMUM LOT COVERAGE AND FLOOR AREA RATIO FOR QUALITY HOUSING BUILDINGS |
||
---|---|---|
District | Maximum #Lot Coverage# for an #Interior Lot# or #Through Lot# (in percent) |
Maximum #Floor Area Ratio# |
R6 R62 R61, 3 R6A R7B R6B R7 R71 R7A R7D R7X R8 R8A R8X R81 R8B R9 R9A R9D R9X R10 |
60 60 65 60 65 65 65 70 70 70 70 70 70 70 |
2.20 2.43 3.00 2.00 3.44 4.00 4.20 5.00 6.02 7.20 4.00 7.52 9.00 10.00 |
- for #zoning lots#, or portions thereof, located within 100 feet of a #wide street# in R6, R7 or R8 Districts without a letter suffix outside the #Manhattan Core#
- for #zoning lots# in an R6 District inside the #Manhattan Core# located within 100 feet of a #wide street#
- for #zoning lots# in an R6 District without a letter suffix the maximum #lot coverage# for any #MIH development# utilizing the height and setback provisions of paragraph (c) of Section 23-664 in Mandatory Inclusionary Housing Program Area 1, as of May 24, 2017 in Community District 9 in the Borough of the Bronx and in Mandatory Inclusionary Housing Program Area 2, as of September 7, 2017, in Community District 14 in the Borough of Queens.