// CODE SNIPPET
(B) Foot Switches
JUMP TO FULL CODE CHAPTER
Switches operated by foot pressure shall be provided with a shield over the contact button to avoid accidental closing of a foot switch.
Related Code Sections
(B) Special Equipment, Foot Switches
Switches operated by foot pressure shall be provided with a shield over the contact button to avoid accidental closing of a foot switch ...
National Electrical Code 2020 of Minnesota > 6 Special Equipment > 665 Induction and Dielectric Heating Equipment > 665.7 Remote Control > (B) Foot Switches
R303.7 Building Planning, Interior Stairway Illumination
of illuminating treads and landings to levels of not less than 1 foot-candle (11 lux) as measured at the center of treads and landings. There shall be a wall ...
2020 Minnesota Residential Code > 3 Building Planning > R303 Light, Ventilation and Heating > R303.7 Interior Stairway Illumination
(B) Wiring and Protection, Switches
No automatic cutout or switch shall be placed in the equipment grounding conductor of a premises wiring system unless the opening of the cutout ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 250 Grounding and Bonding > 250.124 Equipment Grounding Conductor Continuity > (B) Switches
368.239 Wiring Methods and Materials, Switches
Switching devices or disconnecting links provided in the busway run shall have the same momentary rating as the busway. Disconnecting links shall ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > (2)Floors > 368.239 Switches
Article 404 Equipment for General Use, Switches
This article covers all switches, switching devices, and circuit breakers used as switches operating at 1000 volts and below, unless specifically ...