// CODE SNIPPET

1309.3.7.2 Flux

California Plumbing Code 2016 > 13 Health Care Facilities and Medical Gas and Medical Vacuum Systems > 1309.0 Joints and Connections > 1309.3 Brazed Joints and Fittings > 1309.3.7 Brazing Dissimilar Metals > 1309.3.7.2 Flux

JUMP TO FULL CODE CHAPTER

Flux shall be applied sparingly to minimize contamination of the inside of the tube with flux. [NFPA 99:5.1.10.4.4.3, 5.3.6.7.4]

The flux shall be applied and worked over the cleaned surfaces to be brazed using a stiff bristle brush to ensure complete coverage and wetting of the surfaces with flux. [NFPA 99:5.1.10.4.4.4, 5.3.6.7.5]

Related Code Sections

1309.3.7.2 Health Care Facilities and Medical Gas and Medical Vacuum Systems, Flux

Flux shall be applied sparingly to minimize contamination of the inside of the tube with flux. [NFPA 99:5.1.10.4.4.3, 5.3.6.7.4 ...

1309.7.2 Health Care Facilities and Medical Gas and Medical Vacuum Systems, Flux

Flux shall be applied sparingly to minimize contamination of the inside of the tube with flux. The flux shall be applied and worked over the cleaned ...

California Plumbing Code 2019 > 13 Health Care Facilities and Medical Gas and Medical Vacuum Systems > 1309.0 Joints and Connections > 1309.7 Brazing Dissimilar Metals > 1309.7.2 Flux

804.3.3.2 Interior Finish, Decorative Materials and Furnishings, Minimum Critical Radiant Flux

critical radiant flux. The minimum critical radiant flux shall be not less than Class I in Group I-2 and I-3 areas where restraint is not used ...

California Fire Code 2019 > 8 Interior Finish, Decorative Materials and Furnishings > 804 Interior Wall and Ceiling Trimand Interior Floor Finish Innew and Existing Buildings > 804.3 New Interior Floor Finish > 804.3.3 Interior Floor Finish Requirements > 804.3.3.2 Minimum Critical Radiant Flux

804.3.3.2 Interior Finish, Decorative Materials and Furnishings, Minimum Critical Radiant Flux

critical radiant flux. The minimum critical radiant flux shall not be less than Class I in Groups I-1, I-2 and I-3 and not less than Class II ...

California Fire Code 2016 > 8 Interior Finish, Decorative Materials and Furnishings > 804 Interior Wall and Ceiling Trim and Interior Floor Finish in New and Existing Buildings > 804.3 New Interior Floor Finish > 804.3.3 Interior Floor Finish Requirements > 804.3.3.2 Minimum Critical Radiant Flux

804.4.2 Interior Finishes, Minimum Critical Radiant Flux

radiant flux. The minimum critical radiant flux shall not be less than Class I in Groups I-2 and R-2.1 and not less than Class II in Groups A, B, E, H ...

California Building Code 2016 (Vol 1 & 2) > 8 Interior Finishes > 804 Interior Floor Finish > 804.4 Interior Floor Finish Requirements > 804.4.2 Minimum Critical Radiant Flux