// CODE SNIPPET
9.3 Fluorescent Lighting
Go To Full Code Chapter
When in direct view of the light source, the clearance between fluorescent lighting and PEX tubing shall be at least 1.5 m (5 ft). If the minimum clearance cannot be achieved, the PEX tubing shall be protected with a UV-blocking sleeve.
Related Code Sections
9.3 Installation Standard for PEX Tubing Systems for Hot- And Cold-Water Distribution, Fluorescent Lighting
When in direct view of the light source, the clearance between fluorescent lighting and PEX tubing shall be at least 1.5 m (5 ft). If the minimum ...
9.3 Installation Standards, Fluorescent Lighting
When in direct view of the light source, the clearance between fluorescent lighting and PEX tubing shall be at least 1.5 m (5 ft). If the minimum ...
9.3 Installation Standard for PEX Tubing Systems for Hot-and Cold-Water Distribution, Fluorescent Lighting
When in direct view of the light source, the
clearance between fluorescent lighting and
PEX tubing shall be at least 1.5 m (5 ft). If the
minimum ...
(D) Wiring and Protection, Used as Switches
Circuit breakers used as switches in 120-volt and 277-volt fluorescent lighting circuits shall be listed and shall be marked SWD or HID. Circuit ...
(D) Wiring and Protection, Used as Switches
Circuit breakers used as switches in 120-volt and 277-volt fluorescent lighting circuits shall be listed and shall be marked SWD or HID. Circuit ...