// CODE SNIPPET
1203.3.6 Flow Rate and Pressure
JUMP TO FULL CODE CHAPTER
Water supplies shall be provided to plumbing fixtures, appliances and equipment at a flow rate and pressure adequate for their operation.
Related Code Sections
1203.3.6 Plumbing, Flow Rate and Pressure
Water supplies shall be provided to plumbing fixtures, appliances and equipment at a flow rate and pressure adequate for their operation ...
Performance Code for Buildings and Facilities 2009 Pennsylvania > 12 Plumbing > 1203 Domestic Water Supplies > 1203.3 Performance Requirements > 1203.3.6 Flow Rate and Pressure
Section M2105 Hydronic Piping, Ground Source Heat Pump System Loop Piping
) trenches are backfilled. Flow rates and pressure drops shall be compared to calculated values. If actual flow rate or pressure drop figures differ from ...
Residential Code 2009 of Pennsylvania > 21 Hydronic Piping > M2105 Ground Source Heat Pump System Loop Piping
1208.1.1 Hydronic Piping, Ground Source Heat Pump Loop Systems
with no observed leaks. Flow and pressure loss testing shall be performed and the actual flow rates and pressure drops shall be compared ...
Mechanical Code 2009 of Pennsylvania > 12 Hydronic Piping > 1208 Tests > 1208.1 General > 1208.1.1 Ground Source Heat Pump Loop Systems
M2105.28 Hydronic Piping, Testing
without observed leaks. Flow and pressure loss testing shall be performed and the actual flow rates and pressure drops shall be compared ...
Residential Code 2015 of Pennsylvania > 21 Hydronic Piping > M2105 Ground-Source Heat-Pump System Loop Piping > M2105.28 Testing
1210.10 Hydronic Piping, Tests
, in which time there shall not be observed leaks. Flow and pressure loss testing shall be performed and the actual flow rates and pressure drops shall ...
Mechanical Code 2015 of Pennsylvania > 12 Hydronic Piping > 1210 Plastic Pipe Ground-Source Heat Pump Loop Systems > 1210.10 Tests