UpCodes logo
Go To Full Code Chapter
The suction outlet fitting assemblies, where installed, and the skimming systems shall each be designed to accommodate 100 percent of the circulation turnover rate.
314.3.1 Multiple Systems
Where multiple systems are used in a single pool to meet this requirement, each subsystem shall proportionately be designed such that the maximum design flow rates cannot be exceeded during normal operation.

Related Code Sections

314.3 General Compliance, Flow Distribution
in a single pool to meet this requirement, each subsystem shall proportionately be designed such that the maximum design flow rates cannot be exceeded ...
3.7 Definitions, Construction Definitions
Panel construction and other construction where beams, trusses, or other members impede heat flow or water distribution in a manner that materially ...
3.7 Definitions, Construction Definitions
Panel construction and other construction where beams, trusses, or other members impede heat flow or water distribution in a manner that materially ...
3.3.15 Definitions, Hydraulically Designed System
per square foot (mm/min), or a prescribed minimum discharge pressure or flow per sprinkler, distributed with a reasonable degree of uniformity over ...
3.3.15 Definitions, Hydraulically Designed System
per square foot (mm/min), or a prescribed minimum discharge pressure or flow per sprinkler, distributed with a reasonable degree of uniformity over ...