// CODE SNIPPET
2405.10 Flow-Coating Operations
JUMP TO FULL CODE CHAPTER
Related Code Sections
2405.10 Flammable Finishes, Flow-Coating Operations
Flow-coating operations shall comply with the requirements for dip tanks. The area of the sump and any areas on which paint flows shall be considered ...
Fire Code 2018 of Kansas > 24 Flammable Finishes > 2405 Dipping Operations > 2405.10 Flow-Coating Operations
2905.3 Manufacture of Organic Coatings, Drainage
liquids are capable of flowing from the organic coating manufacturing operation so as to constitute a fire hazard to other premises ...
Fire Code 2018 of Kansas > 29 Manufacture of Organic Coatings > 2905 Process Structures > 2905.3 Drainage
105.6.35 Scope and Administration, Organic Coatings
An operational permit is required for any organic-coating manufacturing operation producing more than 1 gallon (4 L) of an organic coating in one day ...
Fire Code 2018 of Kansas > 1 Scope and Administration > 105 Permits > 105.6 Required Operational Permits > 105.6.35 Organic Coatings
Section 2906 Manufacture of Organic Coatings, Process Mills and Kettles
Mills, operating with close clearances, which process flammable and heat-sensitive materials, such as nitrocellulose, shall be located in a detached ...
Section 418 Special Detailed Requirements Based on Occupancy and Use, Organic Coatings
Organic coating manufacturing operations and operations incidental to or connected therewith shall ...
Building Code 2018 of Kansas > 4 Special Detailed Requirements Based on Occupancy and Use > 418 Organic Coatings