// CODE SNIPPET
1910.261(i)(3) Floors and Platforms
JUMP TO FULL CODE CHAPTER
The requirements of paragraph (b)(3) of this section shall apply.
Related Code Sections
1910.261(i)(3) Special Industries, Floors and Platforms
The requirements of paragraph (b)(3) of this section shall apply ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(i) Mechanical Pulp Process > 1910.261(i)(3) Floors and Platforms
1910.68(b)(10)(iii) Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms, Mounting Platform
A mounting platform shall be provided in front or to one side of the uprun at the lowest landing, unless the floor level is such that the following ...
OSHA 1910 General Industry > F Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms > 1910.68 Manlifts > 1910.68(b) General Requirements > 1910.68(b)(10) Bottom Arrangement > 1910.68(b)(10)(iii) Mounting Platform
1910.219(d)(1) Machinery and Machine Guarding, Guarding
Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.219 Mechanical Power-Transmission Apparatus > 1910.219(d) Pulleys > 1910.219(d)(1) Guarding
1910.262(i)(2) Special Industries, Closed Position
Closed position shall mean that the top bar of the gate shall be at least 42 inches from the floor or working platform; and the lower bar shall ...
OSHA 1910 General Industry > R Special Industries > 1910.262 Textiles > 1910.262(i) Warpers > 1910.262(i)(2) Closed Position
1910.303(g)(1)(i)(C) Electrical,
The work space shall be clear and extend from the grade, floor, or platform to the height required by paragraph (g)(1)(vi) of this section. However ...
OSHA 1910 General Industry > S Electrical > 1910.303 General > 1910.303(g) 600 Volts, Nominal, or Less > 1910.303(g)(1) Space About Electric Equipment > 1910.303(g)(1)(i) > 1910.303(g)(1)(i)(C)