// CODE SNIPPET
Section 704 Floor Openings and Shafts
JUMP TO FULL CODE CHAPTER
Interior vertical shafts including, but not limited to, stairways, elevator hoistways, service and utility shafts, that connect two or more stories of a building shall be enclosed or protected as required in Chapter 11. New floor openings in existing buildings shall comply with the International Building Code.
Related Code Sections
Section 704 Fire and Smoke Protection Features, Floor Openings and Shafts
of a building shall be enclosed or protected as required in Chapter 11. New floor openings in existing buildings shall comply with the International ...
Fire Code 2015 of New York State > 7 Fire and Smoke Protection Features > 704 Floor Openings and Shafts
Section 704 Fire-Resistance-Rated Construction, Floor Openings and Shafts
When openings are required to be protected, opening protectives shall be maintained self-closing or automatic-closing by smoke detection. Existing ...
701.1 Fire-Resistance-Rated Construction, Scope
for enclosing floor openings and shafts in existing buildings. New construction shall comply with the Building Code of New York State ...
707.2 Fire-Resistance-Rated Construction, Shaft Enclosure Required
Openings through a floor/ceiling assembly shall be protected by a shaft enclosure complying with this Section.
Exceptions:
A shaft ...
2010 Building Code of NY > 7 Fire-Resistance-Rated Construction > 707 Shaft Enclosures > 707.2 Shaft Enclosure Required
3004.2.1 Elevators and Conveying Systems, Enclosure
Escalator floor openings shall be enclosed with shaft enclosures complying with Section 713 ...
2020 Building Code of New York State > 30 Elevators and Conveying Systems > 3004 Conveying Systems > 3004.2 Escalators and Moving Walks > 3004.2.1 Enclosure