// CODE SNIPPET
407.2.3.1 Floor Designation
JUMP TO FULL CODE CHAPTER
Floor designations complying with 703.2 and 703.4.1 shall be provided on both jambs of elevator hoistway entrances. Floor designations shall be provided in both tactile characters and braille. Tactile characters shall be 2 inches (51 mm) high minimum. A tactile star shall be provided on both jambs at the main entry level.
Related Code Sections
407.2.3.1 Accessible Routes, Floor Designation
Floor designations complying with 703.2 and 703.4.1 shall be provided on both jambs of elevator hoistway entrances. Floor designations shall ...
2010 ADA Standards > 4 Accessible Routes > 407 Elevators > 407.2 Elevator Landing Requirements > 407.2.3 Hoistway Signs > 407.2.3.1 Floor Designation
407.4.6.2 Accessible Routes, Buttons
Car control buttons with floor designations shall comply with 407.4.6.2 and shall be raised or flush.
EXCEPTION : In existing elevators ...
2010 ADA Standards > 4 Accessible Routes > 407 Elevators > 407.4 Elevator Car Requirements > 407.4.6 Elevator Car Controls > 407.4.6.2 Buttons
407.4.7.1 Accessible Routes, Buttons
Buttons with floor designations shall be provided with visible indicators to show that a call has been ...
2010 ADA Standards > 4 Accessible Routes > 407 Elevators > 407.4 Elevator Car Requirements > 407.4.7 Designations and Indicators of Car Controls > 407.4.7.1 Buttons
407.2 Accessible Routes, Elevator Landing Requirements
indicators designating which elevator to use, and a car indicator designating the floors at which the car will stop. Responding cars are programmed ...
407.4.7 Accessible Routes, Designations and Indicators of Car Controls
Buttons with floor designations shall be provided ...
2010 ADA Standards > 4 Accessible Routes > 407 Elevators > 407.4 Elevator Car Requirements > 407.4.7 Designations and Indicators of Car Controls