// CODE SNIPPET

109-123 Floor Area Per Room Regulations

NYC Zoning Resolution > X Special Purpose Districts > 9 - Special Little Italy District (LI) > 109-10 Preservation Area (Area A) > 109-12 Bulk Regulations > 109-123 Floor Area Per Room Regulations

JUMP TO FULL CODE CHAPTER

For the purposes of this Chapter, the density requirements of Sections 23-22, 23-24 or 35-40 shall not apply to any development or enlargement. In lieu thereof, there shall be not more than one room for each 230 square feet of gross residential floor area.

Related Code Sections

502.5.2 Exhaust Systems, Ventilation Rate in Rooms

)] of floor area of the room ...

NYC Mechanical Code 2008 > 5 Exhaust Systems > 502 Required Systems > 502.5 Valve-Regulated Lead-Acid Batteries > 502.5.2 Ventilation Rate in Rooms

Article 6 Ventilation [PDF] (page 5)

be supplied an amount of fresh air equal to one cubic foot per minute per square foot of floor area and an air exhaust of one cubic foot per minute per ...

NYC 1938 Code [PDF] > 6 Ventilation

502.4 Exhaust Systems, Stationary Storage Battery Systems

per minute per square foot (cfm/ft 2 ) (0.00508 m 3 /(s • m 2 )) of floor area of the room ...

NYC Mechanical Code 2014 > 5 Exhaust Systems > 502 Required Systems > 502.4 Stationary Storage Battery Systems

305.10 General Regulations, Repair Garages

Appliances installed in repair garages shall be installed in a detached building or room, separated from repair areas by walls or partitions, floors ...

NYC Fuel Gas Code 2014 > 3 General Regulations > 305 Installation > 305.10 Repair Garages

Section 310 General Regulations, Washroom and Toilet Room Requirements

Washrooms and toilet rooms shall be illuminated and ventilated in accordance with the New York City Building Code and New York City Mechanical ...

NYC Plumbing Code 2014 > 3 General Regulations > 310 Washroom and Toilet Room Requirements