// CODE SNIPPET
M1401.5 Flood Hazard
JUMP TO FULL CODE CHAPTER
In flood hazard areas as established by Table R301.2(1), heating and cooling equipment and appliances shall be located or installed in accordance with Section R322.1.6.
Related Code Sections
1206.9.1 Hydronic Piping, Flood Hazard
Piping located in a flood hazard area shall be capable of resisting hydrostatic and hydrodynamic loads and stresses, including the effects ...
Mechanical Code 2018 of Kansas > 12 Hydronic Piping > 1206 Piping Installation > 1206.9 Strains and Stresses > 1206.9.1 Flood Hazard
1210.8.6 Hydronic Piping, Flood Hazard
Piping located in a flood hazard area shall be capable of resisting hydrostatic and hydrodynamic loads and stresses, including the effects ...
Mechanical Code 2018 of Kansas > 12 Hydronic Piping > 1210 Plastic Pipe Ground-Source Heat Pump Loop Systems > 1210.8 Installation > 1210.8.6 Flood Hazard
1305.2.1 Fuel Oil Piping and Storage, Flood Hazard
Fuel oil pipe, equipment and appliances located in flood hazard areas shall be located above the elevation required by Section 1612 ...
Mechanical Code 2018 of Kansas > 13 Fuel Oil Piping and Storage > 1305 Fuel Oil System Installation > 1305.2 Protection of Pipe, Equipment and Appliances > 1305.2.1 Flood Hazard
301.11 General Regulations, Flood Hazard
For structures located in flood hazard areas, the appliance, equipment and system installations regulated by this code shall be located at or above ...
301.16 General Regulations, Flood Hazard
For structures located in flood hazard areas, mechanical systems, equipment and appliances shall be located at or above the elevation required ...