// CODE SNIPPET
2508.3.1 Floating Angles
JUMP TO FULL CODE CHAPTER
Fasteners at the top and bottom plates of vertical assemblies, or the edges and ends of horizontal assemblies perpendicular to supports, and at the wall line are permitted to be omitted except on shear resisting elements or fire-resistance-rated assemblies. Fasteners shall be applied in such a manner as not to fracture the face paper with the fastener head.
Related Code Sections
2508.3.1 Gypsum Board, Gypsum Panel Products and Plaster, Floating Angles
Fasteners at the top and bottom plates of vertical assemblies, or the edges and ends of horizontal assemblies perpendicular to supports ...
Building Code 2018 of Illinois > 25 Gypsum Board, Gypsum Panel Products and Plaster > 2508 Gypsum Construction > 2508.3 Single-Ply Application > 2508.3.1 Floating Angles
Article 553 Special Occupancies, Floating Buildings
This article covers wiring, services, feeders, and grounding for floating buildings ...
(A) Equipment for General Use, Unbonded (Floating Neutral) Generators
Unbonded generators with both 125-volt and 125/250-volt receptacle outlets shall have listed GFCI protection for personnel integral to the generator ...
National Electrical Code 2017 of Illinois > 4 Equipment for General Use > 445 Generators > 445.20 Ground-Fault Circuit-Interrupter Protection for Receptacles on 15-kW or Smaller Portable Generators > (A) Unbonded (Floating Neutral) Generators
553.5 Special Occupancies, Service Conductors
One set of service conductors shall be permitted to serve more than one set of service equipment ...
National Electrical Code 2017 of Illinois > 5 Special Occupancies > 553 Floating Buildings > 553.5 Service Conductors
553.6 Special Occupancies, Feeder Conductors
Each floating building shall be supplied by a single set of feeder conductors from its service equipment. Exception: Where the floating building has ...
National Electrical Code 2017 of Illinois > 5 Special Occupancies > 553 Floating Buildings > 553.6 Feeder Conductors