// CODE SNIPPET
P-809.10 Flexible Pipe
JUMP TO FULL CODE CHAPTER
Polybutylene flexible pipe shall be permitted in alteration work to supply water closets and
hot and cold water to a lavatory, provided the building contains not more than four dwelling units and is not over three
stories in height. The basement is not considered a story height.
Related Code Sections
P-809.10 Water Supply and Distribution, Flexible Pipe
Polybutylene flexible pipe shall be permitted in alteration work to supply water closets and
hot and cold water to a lavatory, provided the building ...
Philadelphia Plumbing Code > 8 Water Supply and Distribution > P-809 Material for Water Pipe, Tubing and Fittings > P-809.10 Flexible Pipe
3.5.8 Definitions, Flexible Listed Pipe Coupling
A listed coupling or fitting that allows axial displacement, rotation, and at least 1 degree of angular movement of the pipe without inducing harm ...
Standard for the Installation of Sprinkler Systems 2016 of Philadelphia > 3 Definitions > 3.5* System Component Definitions > 3.5.8 Flexible Listed Pipe Coupling
3.11.11* Definitions, Seismic Separation Assembly
An assembly of fittings, pipe, flexible pipe, and/or couplings that permits movement in all directions to accommodate seismic differential movement ...
Standard for the Installation of Sprinkler Systems 2016 of Philadelphia > 3 Definitions > 3.11 Hanging and Bracing Definitions > 3.11.11* Seismic Separation Assembly
9.3.3.2 Hanging, Bracing, and Restraint of System Piping,
Seismic separation assemblies shall consist of flexible fittings or flexible piping so as to allow movement sufficient to accommodate closing ...
Standard for the Installation of Sprinkler Systems 2016 of Philadelphia > 9 Hanging, Bracing, and Restraint of System Piping > 9.3 Protection of Piping Against Damage Where Subject to Earthquakes > 9.3.3* Seismic Separation Assembly > 9.3.3.2
P-602.1.3 Pipe Supports, Plastic Pipe
Flexible plastic pipe and rigid polyethylene (fuseal or similar approved drainage system)
shall have continuous supports for the entire length. ABS ...
Philadelphia Plumbing Code > 6 Pipe Supports > P-602 Horizontal Piping > P-602.1 Spacing > P-602.1.3 Plastic Pipe