// CODE SNIPPET
1302.8 Flexible Connectors and Hoses
Related Code Sections
1302.8 Fuel Oil Piping and Storage, Flexible Connectors and Hoses
Flexible connectors and hoses shall be listed and labeled in accordance with UL 536 ...
Mechanical Code 2018 of Maryland > 13 Fuel Oil Piping and Storage > 1302 Material > 1302.8 Flexible Connectors and Hoses
69.3.1* Liquefied Petroleum Gases and Liquefied Natural Gases, Application
Installation of container appurtenances and regulators Installation of piping (including flexible connectors and hose), hydrostatic relief valves ...
State of Maryland Fire Prevention Code > 69 Liquefied Petroleum Gases and Liquefied Natural Gases > 69.3 Installation of LP-gas Systems > 69.3.1* Application
Fuel dispensing systems, including dispensers, hoses, nozzles, breakaway fittings, swivels, flexible connectors, dispenser emergency shutoff valves ...
State of Maryland Fire Prevention Code > 42 Refueling > 42.5 Fuel Dispensing Systems > 42.5.2 General Requirements > 22.214.171.124*
126.96.36.199.5.1.5 Commercial Cooking,
Flexible connectors longer than the length allowed in NFPA 58, or fuel lines that incorporate hose, shall be used only where approved. [ 58: 188.8.131.52 ...
State of Maryland Fire Prevention Code > 50 Commercial Cooking > 50.7 Mobile and Temporary Cooking Operations > 50.7.2 Mobile Cooking > 184.108.40.206 LP-gas Systems on Vehicles (Other Than Engine Fuel Systems) > 220.127.116.11.5 Piping > 18.104.22.168.5.1 > 22.214.171.124.5.1.5
126.96.36.199.5 Safeguarding Construction, Alteration, and Demolition Operations,
rubber hose, with a diameter of not less than 3 / 4 in. (19 mm) and a listed flexible connector. [ 241: 188.8.131.52] ...
State of Maryland Fire Prevention Code > 16 Safeguarding Construction, Alteration, and Demolition Operations > 16.2 Processes and Hazards > 16.2.2 Waste Disposal > 184.108.40.206 > 220.127.116.11.5