// CODE SNIPPET
1105.2 Flat Decks
JUMP TO FULL CODE CHAPTER
Roof drain strainers for use on sun decks, parking decks and similar areas that are normally serviced and maintained shall comply with Section 1105.1 or shall be of the flat-surface type, installed level with the deck, with an available inlet area not less than two times the area of the conductor or leader to which the drain is connected.
Related Code Sections
1105.2 Storm Drainage, Flat Decks
or shall be of the flat-surface type, installed level with the deck, with an available inlet area not less than two times the area of the conductor ...
Section 1502 Roof Assemblies and Rooftop Structures, Definitions
to the roof deck for weather resistance, fire classification or appearance. ROOF COVERING SYSTEM. See "Roof assembly." ROOF DECK. The flat ...
220.127.116.11 Definitions, Flat Ceiling.
A continuous ceiling in a single plane ...
Standard for the Installation of Sprinkler Systems 2013 of Alabama > 3 Definitions > 3.3 General Definitions > 3.3.5 Ceiling Types > 18.104.22.168 Flat Ceiling.
382.104 Wiring Methods and Materials, Flat Conductors
Concealable nonmetallic extensions shall be constructed, using flat copper conductors equivalent to 14 AWG or 12 AWG conductor sizes, and constructed ...
National Electrical Code 2014 of Alabama > 3 Wiring Methods and Materials > 382 Nonmetallic Extensions > 382.104 Flat Conductors
22.214.171.124.5 Escalators and Moving Walks, Flat Steps
There shall be a minimum of two and a maximum of four flat steps at the entrance and exit of every escalator. (See Section 1.3 and 126.96.36.199.2.) ...
Safety Code for Elevators and Escalators 2019 of Alabama > 6 Escalators and Moving Walks > 6.1 Escalators > 6.1.3 Construction Requirements > 188.8.131.52 Entrance and Egress Ends > 184.108.40.206.5 Flat Steps