// CODE SNIPPET
403.12.6 Flange Facings
JUMP TO FULL CODE CHAPTER
Standard facings shall be permitted for use under this code. Where 150-pound (1034 kPa) pressure-rated steel flanges are bolted to Class 125 cast-iron flanges, the raised face on the steel flange shall be removed.
Related Code Sections
403.12.6 Gas Piping Installations, Flange Facings
Standard facings shall be permitted for use under this code. Where 150-pound (1034 kPa) pressure-rated steel flanges are bolted to Class 125 cast ...
Fuel Gas Code 2018 of Kansas > 4 Gas Piping Installations > 403 (IFGS) Piping Materials > 403.12 Flanges > 403.12.6 Flange Facings
width of compression flange or face. (b) Spacing of lateral bracing shall take into account effects of eccentric loads ...
Building Code Requirements for Structural Concrete of Kansas > 9 Beams > 9.2 General > 9.2.3 Stability > 188.8.131.52
184.108.40.206.6 System Components and Hardware,
Face welds on the internal face of the flange shall be permitted as a water seal in addition to the hub weld required in 220.127.116.11.5 ...
Standard for the Installation of Sprinkler Systems 2016 of Kansas > 6 System Components and Hardware > 6.5 Joining of Pipe and Fittings > 6.5.2 Welded Pipe and Fittings > 18.104.22.168 Welding Requirements > 22.214.171.124.6
126.96.36.199 Structural Analysis,
flange width, beyond face of web Each side of web Least of: 8 h s w /2 ℓ n /8 One side of web Least of: 6 h ...
Building Code Requirements for Structural Concrete of Kansas > 6 Structural Analysis > 6.3 Modeling Assumptions > 6.3.2 T-Beam Geometry > 188.8.131.52
(3) Special Equipment, Cord Overall Length
The exposed cord length shall be measured from the face of the attachment plug to the point of entrance to the truck or the face of the flanged ...
National Electrical Code 2017 of Kansas > 6 Special Equipment > 626 Electrified Truck Parking Spaces > 626.25 Separable Power-Supply Cable Assembly > (B) Power-Supply Cord > (3) Cord Overall Length