// CODE SNIPPET
1910.253(a)(1) Flammable Mixture
JUMP TO FULL CODE CHAPTER
Mixtures of fuel gases and air or oxygen may be explosive and shall be guarded against. No device or attachment facilitating or permitting mixtures of air or oxygen with flammable gases prior to consumption, except at the burner or in a standard torch, shall be allowed unless approved for the purpose.
Related Code Sections
1910.253(a)(1) Welding, Cutting, and Brazing, Flammable Mixture
Mixtures of fuel gases and air or oxygen may be explosive and shall be guarded against. No device or attachment facilitating or permitting mixtures ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.253 Oxygen-Fuel Gas Welding and Cutting > 1910.253(a) General Requirements > 1910.253(a)(1) Flammable Mixture
1910.106(e)(3)(v)(b) Hazardous Materials,
Equipment used in a building and the ventilation of the building shall be designed so as to limit flammable vapor-air mixtures under normal operating ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.106 Flammable Liquids > 1910.106(e) Industrial Plants > 1910.106(e)(3) Unit Physical Operations > 1910.106(e)(3)(v) Ventilation > 1910.106(e)(3)(v)(b)
1910.94(a)(2)(iii) Occupational Health and Environmental Control,
Organic abrasives which are combustible shall be used only in automatic systems. Where flammable or explosive dust mixtures may be present ...
OSHA 1910 General Industry > G Occupational Health and Environmental Control > 1910.94 Ventilation > 1910.94(a) Abrasive Blasting > 1910.94(a)(2) Dust Hazards From Abrasive Blasting > 1910.94(a)(2)(iii)
1910.252(a)(2)(vi)(C) Welding, Cutting, and Brazing,
In the presence of explosive atmospheres (mixtures of flammable gases, vapors, liquids, or dusts with air), or explosive atmospheres that may develop ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.252 General Requirements > 1910.252(a) Fire Prevention and Protection > 1910.252(a)(2) Special Precautions > 1910.252(a)(2)(vi) Prohibited Areas > 1910.252(a)(2)(vi)(C)
1910.94(a)(2) Occupational Health and Environmental Control, Dust Hazards From Abrasive Blasting
are combustible shall be used only in automatic systems. Where flammable or explosive dust mixtures may be present, the construction of the equipment, including ...
OSHA 1910 General Industry > G Occupational Health and Environmental Control > 1910.94 Ventilation > 1910.94(a) Abrasive Blasting > 1910.94(a)(2) Dust Hazards From Abrasive Blasting