// CODE SNIPPET
709.2 Fixtures Not Listed in Table 709.1
Go To Full Code Chapter
Fixtures not listed in Table 709.1 shall have a drainage fixture unit load based on the outlet size of the fixture in accordance with Table 709.2. The minimum trap size for unlisted fixtures shall be the size of the drainage outlet but not less than 11/4 inches (32 mm).
TABLE 709.2
| FIXTURE DRAIN OR TRAP SIZE (inches) | DRAINAGE FIXTURE UNIT VALUE |
| 11/4 | 1 |
| 11/2 | 2 |
| 2 | 3 |
| 21/2 | 4 |
| 3 | 5 |
| 4 | 6 |
For SI: 1 inch = 25.4 mm.
Related Code Sections
709.2 Sanitary Drainage, Fixtures Not Listed in Table 709.1
Fixtures not listed in Table 709.1 shall have a drainage fixture unit load based on the outlet size of the fixture in accordance with Table 709.2 ...
709.2 Sanitary Drainage, Fixtures Not Listed in Table 709.1
Fixtures not listed in Table 709.1 shall have a drainage fixture unit load based on the outlet size of the fixture in accordance with Table 709.2 ...
709.2 Sanitary Drainage, Fixtures Not Listed in Table 709.1
Fixtures not listed in Table 709.1 shall have a drainage fixture unit load based on the outlet size of the fixture in accordance with Table 709.2 ...
709.1 Fire and Smoke Protection Features, General
Vertical and horizontal smoke barriers shall comply with this section ...
709.1 Fire and Smoke Protection Features, General
The following wall assemblies shall comply with this section.
Walls separating dwelling units in the same building as required by Section ...