// CODE SNIPPET
914.4.2 Fixture Drain or Branch
JUMP TO FULL CODE CHAPTER
The relief vent is permitted to be a fixture drain or fixture branch for fixtures located within the same branch interval as the circuit-vented horizontal branch. The maximum discharge to a relief vent shall be four fixture units.
Related Code Sections
914.4.2 Vents, Fixture Drain or Branch
The relief vent is permitted to be a fixture drain or fixture branch for fixtures located within the same branch interval as the circuit-vented ...
Plumbing Code 2018 of Kansas > 9 Vents > 914 Circuit Venting > 914.4 Relief Vent > 914.4.2 Fixture Drain or Branch
P3110.1 Vents, Circuit Vent Permitted
Not greater than eight fixtures connected to a horizontal branch drain shall be permitted to be circuit vented. Each fixture drain shall connect ...
915.2.5 Vents, Fixture Branch or Drain
The fixture branch or fixture drain shall connect to the combination waste and vent within a distance specified in Table 909.1. The combination ...
Plumbing Code 2018 of Kansas > 9 Vents > 915 Combination Waste and Vent System > 915.2 Installation > 915.2.5 Fixture Branch or Drain
918.3.1 Vents, Horizontal Branches
Individual and branch-type air admittance valves shall vent only fixtures that are on the same floor level and connect to a horizontal branch drain ...
Plumbing Code 2018 of Kansas > 9 Vents > 918 Air Admittance Valves > 918.3 Where Permitted > 918.3.1 Horizontal Branches
P3108.1 Vents, Horizontal Wet Vent Permitted
in the drain pipe to the most downstream fixture drain connection. Each fixture drain shall connect horizontally to the horizontal branch being wet ...
Residential Code 2018 of Kansas > 31 Vents > P3108 Wet Venting > P3108.1 Horizontal Wet Vent Permitted