// CODE SNIPPET
1303.15.2 First-Flush Diverter Test
Related Code Sections
1303.15.2 Nonpotable Water Systems, First-Flush Diverter Test
First-flush diverters shall be tested by introducing water into the collection system upstream of the diverter. Proper diversion of the first amount ...
Plumbing Code 2018 of Kansas > 13 Nonpotable Water Systems > 1303 Nonpotable Rainwater Collection and Distribution Systems > 1303.15 Tests and Inspections > 1303.15.2 First-Flush Diverter Test
18.104.22.168.2 Definitions, Flushing Test.
A test of a piping system using flowrates intended to remove debris from the piping system prior to it being placed in service. [ 24, 2016] ...
Standard for the Installation of Sprinkler Systems 2016 of Kansas > 3 Definitions > 3.8 Private Water Supply Piping Definitions > 3.8.1 General Definitions From NFPA 24 > 22.214.171.124 Test > 126.96.36.199.2 Flushing Test.
10.10.2.1* Underground Requirements, Flushing of Piping
of water used for flushing or testing. [ 24: 10.10.2.1.4] ...
Standard for the Installation of Sprinkler Systems 2016 of Kansas > 10 Underground Requirements > 10.10 Testing and Acceptance > 10.10.2 Acceptance Requirements > 10.10.2.1* Flushing of Piping
609.8 Water Supply and Distribution, Valve Leakage Diverter
Each water sterilizer filled with water through directly connected piping shall be equipped with an approved leakage diverter or bleed line ...
Plumbing Code 2018 of Kansas > 6 Water Supply and Distribution > 609 Health Care Plumbing > 609.8 Valve Leakage Diverter
P2712.4 Plumbing Fixtures, Flush Valves in Flush Tanks
Flush valve seats in tanks for flushing water closets shall be not less than 1 inch (25 mm) above the flood-level rim of the bowl connected thereto ...
Residential Code 2018 of Kansas > 27 Plumbing Fixtures > P2712 Water Closets > P2712.4 Flush Valves in Flush Tanks