// CODE SNIPPET
§27-848.10 Fireplace Heat Exchangers and Fireplace Inserts
JUMP TO FULL CODE CHAPTER
Fireplace heat exchangers and fireplace inserts shall not be inserted into or connected to factory-built fireplaces unless listed by a nationally recognized testing laboratory and accepted for use in the specific fireplace.
Related Code Sections
§27-848.10 Heating and Combustion Equipment, Fireplace Heat Exchangers and Fireplace Inserts
Fireplace heat exchangers and fireplace inserts shall not be inserted into or connected to factory-built fireplaces unless listed by a nationally ...
NYC 1968 Code (Vol I) > 14 Heating and Combustion Equipment > 19 Solid Fuel Fireplaces, Fireplace Stoves and Room Heaters > §27-848.10 Fireplace Heat Exchangers and Fireplace Inserts
§27-816 Heating and Combustion Equipment, Fireplace Heaters
Gas-fired heaters, approved for use in fireplace recesses only, shall not be used elsewhere ...
NYC 1968 Code (Vol I) > 14 Heating and Combustion Equipment > 12 Unit Heaters > §27-816 Fireplace Heaters
*901.7 Specific Appliances, Fireplaces, Solid Fuel-Burning Equipment, and Noise Control Requirements, Fireplaces
Fireplaces (solid-fuel-type or ANSI Z21.50) shall be installed with tight-fitting noncombustible fireplace doors to control infiltration losses ...
NYC Mechanical Code 2014 > 9 Specific Appliances, Fireplaces, Solid Fuel-Burning Equipment, and Noise Control Requirements > 901 General > *901.7 Fireplaces
503.10.13 Chimneys and Vents, Fireplaces
A vent connector shall not be connected to a chimney flue serving a fireplace ...
NYC Fuel Gas Code 2008 > 5 Chimneys and Vents > 503 Venting of Equipment > 503.10 Vent Connectors for Category I Equipment > 503.10.13 Fireplaces
503.10.13 Chimneys and Vents, Fireplaces
A vent connector shall not be connected to a chimney flue serving a fireplace ...
NYC Fuel Gas Code 2014 > 5 Chimneys and Vents > 503 Venting of Appliances > 503.10 Vent Connectors for Category I Appliances > 503.10.13 Fireplaces