// CODE SNIPPET
410.3.5.2 Fire Test
JUMP TO FULL CODE CHAPTER
A sample curtain with a minimum of two vertical seams shall be subjected to the standard fire test specified in ASTM E 119 for a period of 30 minutes. The curtain shall overlap the furnace edges by an amount that is appropriate to seal the top and sides. The curtain shall have a bottom pocket containing a minimum of 4 pounds per linear foot (5.9 kg/m) of batten. The exposed surface of the curtain shall not glow, and flame or smoke shall not penetrate the curtain during the test period. Unexposed surface temperature and hose stream test requirements are not applicable to the proscenium fire safety curtain test.
Related Code Sections
1509.2 Roof Assemblies and Rooftop Structures, Fire Testing
Radiant barriers shall be permitted for use above decks where the radiant barrier is covered with an approved roof covering and the system ...
Building Code 2015 of New York State > 15 Roof Assemblies and Rooftop Structures > 1509 Radiant Barriers Installed Above Deck > 1509.2 Fire Testing
1509.2 Roof Assemblies and Rooftop Structures, Fire Testing
Radiant barriers shall be permitted for use above decks where the radiant barrier is covered with an approved roof covering and the system ...
2020 Building Code of New York State > 15 Roof Assemblies and Rooftop Structures > 1509 Radiant Barriers Installed Above Deck > 1509.2 Fire Testing
410.3.5.2 Special Detailed Requirements Based on Use and Occupancy, Fire Test
A sample curtain with a minimum of two vertical seams shall be subjected to the standard fire test specified in ASTM E 119 for a period of 30 minutes ...
2010 Building Code of NY > 4 Special Detailed Requirements Based on Use and Occupancy > 410 Stages and Platforms > 410.3 Stages > 410.3.5 Proscenium Curtain > 410.3.5.2 Fire Test
713.3 Fire-Resistance-Rated Construction, Fire Test Criteria
Fire-resistant joint systems shall be tested in accordance with the requirements of either ASTM E 1966 or UL 2079. Nonsymmetrical wall joint systems ...
2010 Building Code of NY > 7 Fire-Resistance-Rated Construction > 713 Fire-Resistant Joint Systems > 713.3 Fire Test Criteria
715.3 Fire and Smoke Protection Features, Fire Test Criteria
Fire-resistant joint systems shall be tested in accordance with the requirements of either ASTM E1966 or UL 2079. Nonsymmetrical wall joint systems ...
2020 Building Code of New York State > 7 Fire and Smoke Protection Features > 715 Fire-Resistant Joint Systems > 715.3 Fire Test Criteria