// CODE SNIPPET
§27-977 Fire Systems Electrical Tests
JUMP TO FULL CODE CHAPTER
Upon completion of a fire alarm system, and other electrical systems, the installation shall be subjected to a test to demonstrate the efficiency of operation of all the components in the system and to an acceptance test by the fire department.
Related Code Sections
§27-977 Fire Alarm, Detection and Extinguishing Equipment, Fire Systems Electrical Tests
Upon completion of a fire alarm system, and other electrical systems, the installation shall be subjected to a test to demonstrate the efficiency ...
NYC 1968 Code (Vol I) > 17 Fire Alarm, Detection and Extinguishing Equipment > 5 Interior Fire Alarm and Signal System > §27-977 Fire Systems Electrical Tests
2702.3 Electrical, Maintenance
Emergency and standby power systems shall be maintained and tested in accordance with the New York City Fire Code and New York City Electrical ...
NYC Building Code 2014 > 27 Electrical > 2702 Emergency and Standby Power Systems > 2702.3 Maintenance
2702.3 Electrical, Maintenance
Emergency and standby power systems shall be maintained and tested in accordance with the New York City Fire Code and New York City Electrical Code ...
NYC Building Code 2008 > 27 Electrical > 2702 Emergency and Standby Power Systems > 2702.3 Maintenance
Reference Standard 17 Fire, Alarms, Detection and Extinguishing Equipment [PDF] (page 51)
and enact three new sections as follows: Section 7-1.2.2 – Personnel shall be qualified and experienced in the inspection and testing of fire alarm systems ...
NYC 1968 Code (Vol II) [PDF] > Reference Standard 17 Fire, Alarms, Detection and Extinguishing Equipment
Section 633 Specific Appliances, Fuel Cell Power Plants
Stationary fuel-cell power systems having a power output not exceeding 1 MW shall be tested in accordance with CSA America FC 1 and shall ...