// CODE SNIPPET
3.3.11 Fire Control
JUMP TO FULL CODE CHAPTER
Limiting the size of a fire by distribution of water so as to decrease the heat release rate and pre-wet adjacent combustibles, while controlling ceiling gas temperatures to avoid structural damage.
Related Code Sections
3.3.11 Definitions, Fire Control
Limiting the size of a fire by distribution of water so as to decrease the heat release rate and pre-wet adjacent combustibles, while controlling ...
Standard for the Installation of Sprinkler Systems 2013 of New York State > 3 Definitions > 3.3 General Definitions > 3.3.11 Fire Control
3.3.11 Definitions, Fire Control
Limiting the size of a fire by distribution of water so as to decrease the heat release rate and pre-wet adjacent combustibles, while controlling ...
Standard for the Installation of Sprinkler Systems 2016 of New York State > 3 Definitions > 3.3 General Definitions > 3.3.11 Fire Control
5607.13 Explosives and Fireworks, Firing Control
A blast shall not be fired until the blaster has made certain that all surplus explosive materials are in a safe place in accordance with Section ...
Fire Code 2015 of New York State > 56 Explosives and Fireworks > 5607 Blasting > 5607.13 Firing Control
5607.13 Explosives and Fireworks, Firing Control
A blast shall not be fired until the blaster has made certain that all surplus explosive materials are in a safe place in accordance with Section ...
11.2 Design Approaches, Occupancy Hazard Fire Control Approach for Spray Sprinklers
or the potential areas of fire are limited by building size or compart- mentation such that no open areas exceed 3000 ft 2 (279 m 2 ) for light ...
Standard for the Installation of Sprinkler Systems 2013 of New York State > 11 Design Approaches > 11.2 Occupancy Hazard Fire Control Approach for Spray Sprinklers