// CODE SNIPPET
704.13.5 Finished Condition
JUMP TO FULL CODE CHAPTER
The finished condition of SFRM applied to structural members or assemblies shall not, upon complete drying or curing, exhibit cracks, voids, spalls, delamination or any exposure of the substrate. Surface irregularities of SFRM shall be deemed acceptable.
Related Code Sections
704.13.5 Fire and Smoke Protection Features, Finished Condition
The finished condition of SFRM applied to structural members or assemblies shall not, upon complete drying or curing, exhibit cracks, voids, spalls ...
Building Code 2018 of Illinois > 7 Fire and Smoke Protection Features > 704 Fire-Resistance Rating of Structural Members > 704.13 Sprayed Fire-Resistant Materials (SFRM) > 704.13.5 Finished Condition
1705.14.1 Special Inspections and Tests, Physical and Visual Tests
: Condition of substrates. Thickness of application. Density in pounds per cubic foot (kg/m 3 ). Bond strength adhesion/cohesion. Condition of finished ...
Building Code 2018 of Illinois > 17 Special Inspections and Tests > 1705 Required Special Inspections and Tests > 1705.14 Sprayed Fire-Resistant Materials > 1705.14.1 Physical and Visual Tests
384.10 Wiring Methods and Materials, Uses Permitted
vapors where protected by finishes approved for the condition. As power poles. In hazardous (classified) locations as permitted in Chapter 5 ...
National Electrical Code 2017 of Illinois > 3 Wiring Methods and Materials > 384 Strut-Type Channel Raceway > 384.10 Uses Permitted
320.12 Wiring Methods and Materials, Uses Not Permitted
walls where such walls are exposed or subject to excessive moisture or dampness Where exposed to corrosive conditions Embedded in plaster finish ...
National Electrical Code 2017 of Illinois > 3 Wiring Methods and Materials > 320 Armored Cable: Type AC > 320.12 Uses Not Permitted
C402.2.5 [CE] Commercial Energy Efficiency, Below-Grade Walls
required shall extend to a depth of not less than 10 feet (3048 mm) below the outside finished ground level, or to the level of the lowest floor ...
2018 Illinois Energy Conservation Code Standards for Privately Funded Commercial Facilities and Standards for Residential Buildings > 4 [CE] Commercial Energy Efficiency > C402 Building Envelope Requirements > C402.2 Specific Building Thermal Envelope Insulation Requirements (Prescriptive) > C402.2.5 Below-Grade Walls