// CODE SNIPPET
1910.215(c)(3) Finish and Balance
JUMP TO FULL CODE CHAPTER
Flanges shall be dimensionally accurate and in good balance. There shall be no rough surfaces or sharp edges.
Related Code Sections
1910.215(c)(3) Machinery and Machine Guarding, Finish and Balance
Flanges shall be dimensionally accurate and in good balance. There shall be no rough surfaces or sharp edges ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.215 Abrasive Wheel Machinery > 1910.215(c) Flanges > 1910.215(c)(3) Finish and Balance
1910.137(a)(3) Personal Protective Equipment, Workmanship and Finish
Equipment shall be free of physical irregularities that can adversely affect the insulating properties of the equipment and that can be detected ...
OSHA 1910 General Industry > I Personal Protective Equipment > 1910.137 Electrical Protective Equipment > 1910.137(a) Design Requirements for Specific Types of Electrical Protective Equipment > 1910.137(a)(3) Workmanship and Finish
1910.261(l) Special Industries, Finishing Room
- Rolls shall be cleaned only on the outrunning ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(l) Finishing Room
1910.119(d)(3)(i)(G) Hazardous Materials,
Material and energy balances for processes built after May 26, 1992; and, ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.119 Process Safety Management of Highly Hazardous Chemicals > 1910.119(d) > 1910.119(d)(3) > 1910.119(d)(3)(i) > 1910.119(d)(3)(i)(G)
1910.184(c)(5) Materials Handling and Storage,
Slings used in a basket hitch shall have the loads balanced to prevent slippage ...
OSHA 1910 General Industry > N Materials Handling and Storage > 1910.184 Slings > 1910.184(c) Safe Operating Practices > 1910.184(c)(5)