// CODE SNIPPET
Related Code Sections
R506.2.1 Floors, Fill
Fill material shall be free of vegetation and foreign material. The fill shall be compacted to ensure uniform support of the slab, and except where ...
Residential Code 2018 of Kansas > 5 Floors > R506 Concrete Floors (On Ground) > R506.2 Site Preparation > R506.2.1 Fill
1305.6 Fuel Oil Piping and Storage, Fill Piping
A fill pipe shall terminate outside of a building at a point not less than 2 feet (610 mm) from any building opening at the same or lower level. A ...
Mechanical Code 2018 of Kansas > 13 Fuel Oil Piping and Storage > 1305 Fuel Oil System Installation > 1305.6 Fill Piping
(1) Wiring Methods and Materials, Conductor Fill
required for free conductors in 300.14 shall be counted twice. The conductor fill shall be calculated using Table 314.16(B). A conductor, no part of which ...
National Electrical Code 2017 of Kansas > 3 Wiring Methods and Materials > 314 Outlet, Device, Pull, and Junction Boxes; Conduit Bodies; Fittings; And Handhole Enclosures > 314.16 Number of Conductors in Outlet, Device, and Junction Boxes, and Conduit Bodies > (B) Box Fill Calculations > (1) Conductor Fill
3304.1 Safeguards During Construction, Excavation and Fill
Excavation and fill for buildings and structures shall be constructed or protected so as not to endanger life or property. Stumps and roots shall ...
Building Code 2018 of Kansas > 33 Safeguards During Construction > 3304 Site Work > 3304.1 Excavation and Fill
(C) Wiring Methods and Materials, Cinder Fill
IMC shall be permitted to be installed in or under cinder fill where subject to permanent moisture where protected on all sides by a layer ...
National Electrical Code 2017 of Kansas > 3 Wiring Methods and Materials > 342 Intermediate Metal Conduit: Type IMC > 342.10 Uses Permitted > (C) Cinder Fill