// CODE SNIPPET
1406.4 Field Installations
JUMP TO FULL CODE CHAPTER
The Authority Having Jurisdiction shall compare the field installations with the documentation supplied by the installer to determine the following:
- The required F ratings (1 hour, 2 hour, 3 hour, or 4 hour) and T ratings (0 hour, 1 hour, 2 hour, 3 hour, or 4 hour) of the penetration firestop systems are at least the same as the hourly rating of the assembly being penetrated.
- The penetrating firestop system includes the penetrating item as documented through testing of the systems conducted by an independent testing agency.
- The penetrating firestop system is installed as tested.
Related Code Sections
1406.4 Firestop Protection, Field Installations
The Authority Having Jurisdiction shall compare the field installations with the documentation supplied by the installer to determine the following ...
2018 Uniform Plumbing Code of Nevada > 14 Firestop Protection > 1406.0 Required Inspection > 1406.4 Field Installations
600.12 Special Equipment, Field-Installed Secondary Wiring
Field-installed secondary circuit wiring for electric signs, retrofit kits, outline lighting systems, skeleton tubing, and photovoltaic (PV) powered ...
National Electrical Code 2017 of Nevada > 6 Special Equipment > 600 Electric Signs and Outline Lighting > 600.12 Field-Installed Secondary Wiring
600.30 Special Equipment, Applicability
Part II of this article shall apply to all of the following: Field-installed skeleton tubing Field-installed secondary circuits Outline ...
National Electrical Code 2017 of Nevada > 6 Special Equipment > 600 Electric Signs and Outline Lighting > 600.30 Applicability
(D) Special Equipment, Protection
Field-installed skeleton tubing shall not be subject to physical damage. Where the tubing is readily accessible to other than qualified persons ...
National Electrical Code 2017 of Nevada > 6 Special Equipment > 600 Electric Signs and Outline Lighting > 600.41 Neon Tubing > (D) Protection
(B) Wiring Methods and Materials, Power Monitoring Equipment
of the following conditions are met: The power monitoring equipment is identified as a field installable accessory as part of the listed equipment, or is a listed ...
National Electrical Code 2017 of Nevada > 3 Wiring Methods and Materials > 312 Cabinets, Cutout Boxes, and Meter Socket Enclosures > 312.8 Switch and Overcurrent Device Enclosures > (B) Power Monitoring Equipment