// CODE SNIPPET
(A) Feeders With Common Neutral
Related Code Sections
(A) Wiring and Protection, Feeders With Common Neutral
Up to three sets of 3-wire feeders or two sets of 4-wire or 5-wire feeders shall be permitted to utilize a common neutral ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 215 Feeders > 215.4 Feeders With Common Neutral Conductor > (A) Feeders With Common Neutral
(B) Wiring and Protection, Common Neutral
The ampacity of the neutral conductor shall not be less than the maximum net calculated load current between the neutral conductor and all ungrounded ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 225 Outside Branch Circuits and Feeders > 225.7 Lighting Equipment Installed Outdoors > (B) Common Neutral
(B) Special Occupancies, Feeders
-pole gang operated. No pole shall be required in the neutral conductor. The overcurrent device setting for each feeder shall not exceed 400 percent ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 530 Motion Picture and Television Studios and Similar Locations > 530.18 Overcurrent Protection — General > (B) Feeders
(B) Special Occupancies, Neutral Conductor
For the purpose of ampacity adjustment, the following shall apply: The neutral conductor of feeders supplying solid-state, phase-control 3-phase ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 520 Theaters, Audience Areas of Motion Picture and Television Studios, Performance Areas, and Similar Locations > 520.27 Stage Switchboard Feeders > (B) Neutral Conductor
(3) Wiring and Protection, Common Location
conductor shall be sized in accordance with 250.66 based on the service-entrance or feeder conductor(s) at the common location where the connection ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 250 Grounding and Bonding > 250.64 Grounding Electrode Conductor Installation > (D) Building or Structure With Multiple Disconnecting Means in Separate Enclosures > (3) Common Location