// CODE SNIPPET
E3603.1.3 Feeder Size Relative to Service Size
JUMP TO FULL CODE CHAPTER
A feeder for an individual dwelling unit shall not be required to have an ampacity greater than that specified in Sections E3603.1.1 and E3603.1.2.
Related Code Sections
E3603.1.3 Services, Feeder Size Relative to Service Size
A feeder for an individual dwelling unit shall not be required to have an ampacity greater than that specified in Sections E3603.1.1 and E3603.1.2 ...
Residential Code 2018 of Kansas > 36 Services > E3603 Service, Feeder and Grounding Electrode Conductor Sizing > E3603.1 Grounded and Ungrounded Service Conductor Size > E3603.1.3 Feeder Size Relative to Service Size
(3) Wiring and Protection, Ampacity Relative to Service Conductors
The feeder conductor ampacity shall not be less than that of the service conductors where the feeder conductors carry the total load supplied ...
National Electrical Code 2017 of Kansas > 2 Wiring and Protection > 215 Feeders > 215.2 Minimum Rating and Size > (A) Feeders Not More Than 600 Volts > (3) Ampacity Relative to Service Conductors
E3704.1 Branch Circuit and Feeder Requirements, Conductor Size
Feeder conductors that do not serve 100 percent of the dwelling unit load and branch-circuit conductors shall be of a size sufficient to carry ...
Residential Code 2018 of Kansas > 37 Branch Circuit and Feeder Requirements > E3704 Feeder Requirements > E3704.1 Conductor Size
(D) Wiring and Protection, Size
Main bonding jumpers and system bonding jumpers shall be sized in accordance with 250.28(D)(1) through (D)(3 ...
National Electrical Code 2017 of Kansas > 2 Wiring and Protection > 250 Grounding and Bonding > 250.28 Main Bonding Jumper and System Bonding Jumper > (D) Size
E4205.6 Swimming Pools, Feeders
and on the load side of the service equipment. Where feeders are installed in corrosive environments as described in Section E4202.2, the wiring method ...