// CODE SNIPPET
1405.18.3.8 Fastening for Multistory Buildings
JUMP TO FULL CODE CHAPTER
The system materials shall be fastened to each other and the overall assembly shall be attached to the building frame so as to prevent failure due to elevated temperatures that occur in a building fire, wind loads, wetting or other environmental conditions. Installations over two stories shall be secured with either full bed of adhesive or corrosion-resistant mechanical fasteners.
Related Code Sections
1405.18.3.8 Exterior Walls, Fastening for Multistory Buildings
The system materials shall be fastened to each other and the overall assembly shall be attached to the building frame so as to prevent failure due ...
NYC Building Code 2008 > 14 Exterior Walls > 1405 Installation of Wall Coverings > 1405.18 Exterior Insulation Finish System (EIFS) > 1405.18.3 Installation on Type I, II, III, or IV Construction > 1405.18.3.8 Fastening for Multistory Buildings
503.6.10 Chimneys and Vents, Multistory Prohibited
Common venting systems for appliances located on more than one floor level shall be prohibited ...
NYC Fuel Gas Code 2014 > 5 Chimneys and Vents > 503 Venting of Appliances > 503.6 Gas Vents > 503.6.10 Multistory Prohibited
801.19 Chimneys and Vents, Multistory Prohibited
Common venting systems for appliances located on more than one floor level shall be prohibited ...
504.3.12 Chimneys and Vents, Multistory Height Measurement
For multistory installations, available total height (H) for each segment of the system shall be the vertical distance between the highest draft hood ...
NYC Fuel Gas Code 2008 > 5 Chimneys and Vents > 504 Sizing of Category I Appliance Venting Systems > 504.3 Application of Multiple Appliance Vent Tables 504 > 504.3.12 Multistory Height Measurement